CYCLONE C30
16-30 HP (12-22 KW)
540, 1000, 2000 rpm – cat. 1
The Cyclone C30 is a three-spindle mower suitable for tractors ranging from 16 to 30 HP. It is available in three models with working widths of 120, 150 or 180 cm.
The C30 have a rear discharge that allows the cut grass to be distributed equally across the entire cutting width.
The belt driven transmission with automatic spring tensioning makes it easier to operate and perform maintenance of this machine. The Cyclone range models are always equipped with axial grease fittings that allow the bearings of the blade spindles to be greased without removing the belt shields. Pulleys are individually balanced to ensure a perfect operation of the transmission.
The Cyclone C30 uses sturdy stamped and reinforced wheel arms and comes with a floating 3-point hitch that allows the mower to better track over uneven grounds.
Standard
![Attacco a tre punti reversibile per applicazione frontale o posteriore](https://www.rotomec.com/site/wp-content/uploads/2021/04/C28-attacco-a-tre-punti-reversibile.jpg)
Reversible three point hitch for front or rear tractor mounting
![Dual rear roller mounting position, inside or outside the cutting chamber](https://www.rotomec.com/site/wp-content/uploads/2021/04/C28-moltiplicatori-di-produzione-Rotomec.jpg)
Gearboxes manufactured by Rotomec
![Dual rear roller mounting position, inside or outside the cutting chamber](https://www.rotomec.com/site/wp-content/uploads/2021/04/C30-braccio-ruota-in-acciaio-stampato.jpg)
Stamped steel wheel arms attached by five bolts
![Manual or hydraulic side-shift up to 40 cm](https://www.rotomec.com/site/wp-content/uploads/2021/04/C26-ruote-piene_o_pneumatiche.jpg)
Hard or air tires
![Manual or hydraulic side-shift up to 40 cm](https://www.rotomec.com/site/wp-content/uploads/2021/04/C28-ingrassatori-assiali.jpg)
Axial grease fittings for easy and accurate lubrication
![Choice of fine cut blades, dethatching blades, reverse ‘Y’ blades, paddle blades or hammer type blades](https://www.rotomec.com/site/wp-content/uploads/2021/04/C28-cinghia-dentata.jpg)
Heavy duty reinforced belt (BX) with automatic belt tensioner
Technical features
![]() |
HP | 16-30 |
![]() |
cm | 120 |
![]() |
cm | 130 |
![]() |
Kg | 155 |
![]() |
r.p.m. | 3.037 |
![]() |
m/s | 67 |
![]() |
N° | 3 |
![]() |
mm | 25/100 |
![]() |
N° | 1 BX |
![]() |
N° – mm | 4-210×80 |
![]() |
1 3/8″ | ASAE cat. 2 |
![]() |
HP | 20-30 |
![]() |
cm | 150 |
![]() |
cm | 157 |
![]() |
Kg | 170 |
![]() |
r.p.m. | 2.803 |
![]() |
m/s | 75 |
![]() |
N° | 3 |
![]() |
mm | 25/100 |
![]() |
N° | 1 BX |
![]() |
N° – mm | 4-210×80 |
![]() |
1 3/8″ | ASAE cat. 2 |
![]() |
HP | 25-30 |
![]() |
cm | 180 |
![]() |
cm | 189 |
![]() |
Kg | 200 |
![]() |
r.p.m. | 2.278 |
![]() |
m/s | 74 |
![]() |
N° | 3 |
![]() |
mm | 25/100 |
![]() |
N° | 1 BX |
![]() |
N° – mm | 4-210×80 |
![]() |
1 3/8″ | ASAE cat. 2 |