CYCLONE C30-CE5
The C30-CE5 is a push or pull type rear discharge three spindle engine driven finishing mower ideal for lawn tractors without PTO and for ATVs. The engine is a 10,5 HP Briggs & Stratton with a centrifugal clutch and comes with a safety kill switch.
The cutting height is adjustable from a minimum of 2,5 cm to a maximum of 10 cm and is done by adding or removing the spacers on each wheel yoke.
Standard
![Attacco a tre punti reversibile per applicazione frontale o posteriore](https://www.rotomec.com/site/wp-content/uploads/2021/04/C28-attacco-a-tre-punti-reversibile.jpg)
Reversible hitch for front or rear mounting
![Dual rear roller mounting position, inside or outside the cutting chamber](https://www.rotomec.com/site/wp-content/uploads/2021/04/C30-CE5-Attacco-spostabile.jpg)
Capable of being center mounted or offset
Technical features
![]() |
cm | 150 |
![]() |
cm | 157 |
![]() |
Kg | 176 |
![]() |
r.p.m. | 2.673 |
![]() |
m/s | 72 |
![]() |
N° | 3 |
![]() |
mm | 25/100 |
![]() |
N° | 2 BX |
![]() |
N° – mm | 4-210×80 |
![]() |
Briggs & Stratton 10,5 HP |