CYCLONE C50
20-50 HP (15-37 KW)
540, 1000 rpm – cat. 1
The Cyclone C50 is a three-spindle mower suitable for tractors ranging from 20 to 50 HP.
It is available in four models with rear discharge and working widths of 120, 150, 180 and 210 cm.
The machine is equipped with a sturdy frame with reinforcements in the areas where it is subject to the most strain and a double belt drive with manual tensioning of the belts. This solution allows for a perfect belt tension combined with longer belt life. The rear chains that are fitted with on all C50 mowers, divert any thrown objects towards the ground and are therefore indispensable for anyone who cuts grass in public parks, near roads, or near residential areas.
Standard
![Attacco a tre punti reversibile per applicazione frontale o posteriore](https://www.rotomec.com/site/wp-content/uploads/2021/04/C28-attacco-a-tre-punti-reversibile.jpg)
Reversible three point hitch for front or rear tractor mounting
![Dual rear roller mounting position, inside or outside the cutting chamber](https://www.rotomec.com/site/wp-content/uploads/2021/04/C50-moltiplicatori-di-produzione-Rotomec.jpg)
Gearboxes, manufactured by Rotomec, equipped with spiral gears to increase strength and quietness
![Manual or hydraulic side-shift up to 40 cm](https://www.rotomec.com/site/wp-content/uploads/2021/04/Possibilita-di-scelta-fra-coltelli-standard-espulsori-sminuzzatori-e-piatti.jpg)
Choice of standard blades, high lift blades, mulching blades and flat blades
![Manual or hydraulic side-shift up to 40 cm](https://www.rotomec.com/site/wp-content/uploads/2021/04/C26-ruote-piene_o_pneumatiche.jpg)
Hard or air tires with ball bearings
![Choice of fine cut blades, dethatching blades, reverse ‘Y’ blades, paddle blades or hammer type blades](https://www.rotomec.com/site/wp-content/uploads/2021/04/C50-ingrassatori-assiali.jpg)
Axial grease fittings for easy and accurate lubrication
Technical features
![]() |
HP | 20-50 |
![]() |
cm | 120 |
![]() |
cm | 130 |
![]() |
Kg | 240 |
![]() |
r.p.m. | 3.475 |
![]() |
m/s | 77 |
![]() |
N° | 3 |
![]() |
mm | 25/125 |
![]() |
N° | 2 SPBX |
![]() |
N° – mm | 4-250×80 |
![]() |
1 3/8″ | ASAE cat. 3 |
![]() |
HP | 20-50 |
![]() |
cm | 150 |
![]() |
cm | 157 |
![]() |
Kg | 250 |
![]() |
r.p.m. | 3.210 |
![]() |
m/s | 86 |
![]() |
N° | 3 |
![]() |
mm | 25/125 |
![]() |
N° | 2 SPBX |
![]() |
N° – mm | 4-250×80 |
![]() |
1 3/8″ | ASAE cat. 3 |
![]() |
HP | 25-50 |
![]() |
cm | 180 |
![]() |
cm | 189 |
![]() |
Kg | 272 |
![]() |
r.p.m. | 2.605 |
![]() |
m/s | 85 |
![]() |
N° | 3 |
![]() |
mm | 25/125 |
![]() |
N° | 2 SPBX |
![]() |
N° – mm | 4-250×80 |
![]() |
1 3/8″ | ASAE cat. 3 |
![]() |
HP | 30-50 |
![]() |
cm | 210 |
![]() |
cm | 219 |
![]() |
Kg | 313 |
![]() |
r.p.m. | 2.195 |
![]() |
m/s | 83 |
![]() |
N° | 3 |
![]() |
mm | 25/125 |
![]() |
N° | 2 SPBX |
![]() |
N° – mm | 4-250×80 |
![]() |
1 3/8″ | ASAE cat. 3 |
Optional equipment
0099525 C50-RD4
0099526 C50-RD6
0099526 C50-RD6
0099527 C50-RD7
Three point hitch cat. ‘1N’, additional