TILL-RITE T70
30-70 HP (22-52 KW)
540 rpm – cat. 1
The T70 is a rotary tiller designed to work with tractors ranging from 30 to 70 HP. It is the ideal machine for use anywhere from orchards to nurseries, from vineyards to greenhouses and all other types of landscaping. The high carbon steel rotor shaft allows for a working depth up to 22 cm. The rotor shaft also comes with double flanges on the side to facilitate blade replacement. These rotary tillers are available with forward or reverse tilling rotation. The tiller may be equipped either with side skids, or with a rear depth control roller that can either be caged or toothed.
Standard
![Dual rear roller mounting position, inside or outside the cutting chamber](https://rotomec.com/site/wp-content/uploads/2021/04/rotazione-posteriore-2.jpg)
Front or rear blade rotation
![Manual or hydraulic side-shift up to 40 cm](https://rotomec.com/site/wp-content/uploads/2021/04/T60-ingrandito-gruppo.jpg)
Gearbox manufactured by Rotomec
![Manual or hydraulic side-shift up to 40 cm](https://rotomec.com/site/wp-content/uploads/2021/04/Tendicinghia-ingrandito-T30-T40-T50-T60-T70_4.jpg)
Lateral ASA 100 chain drive transmission in oil bath
![Choice of fine cut blades, dethatching blades, reverse ‘Y’ blades, paddle blades or hammer type blades](https://rotomec.com/site/wp-content/uploads/2021/04/T40-supporti-albero-rotore.jpg)
Stamped steel rotor shaft supports and transmission
![Choice of fine cut blades, dethatching blades, reverse ‘Y’ blades, paddle blades or hammer type blades](https://rotomec.com/site/wp-content/uploads/2021/04/T40-rotore-con-doppi-mozzi.jpg)
Rotor shaft with flanges for easy blade replacement
Technical features
![]() |
HP | 30-70 |
![]() |
cm | 165 |
![]() |
cm | 185 |
![]() |
Kg | 335 |
![]() |
r.p.m. | 221 |
![]() |
N° | 8 |
![]() |
N° | 32/48 |
![]() |
mm | 220 |
![]() |
z | 12-14 |
![]() |
1 3/8″ | ASAE cat. 6 |
![]() |
HP | 35-70 |
![]() |
cm | 185 |
![]() |
cm | 205 |
![]() |
Kg | 360 |
![]() |
r.p.m. | 221 |
![]() |
N° | 9 |
![]() |
N° | 36/54 |
![]() |
mm | 220 |
![]() |
z | 12-14 |
![]() |
1 3/8″ | ASAE cat. 6 |
![]() |
HP | 40-70 |
![]() |
cm | 205 |
![]() |
cm | 225 |
![]() |
Kg | 385 |
![]() |
r.p.m. | 221 |
![]() |
N° | 10 |
![]() |
N° | 40/60 |
![]() |
mm | 220 |
![]() |
z | 12-14 |
![]() |
1 3/8″ | ASAE cat. 6 |
![]() |
HP | 30-70 |
![]() |
cm | 165 |
![]() |
cm | 185 |
![]() |
Kg | 405 |
![]() |
r.p.m. | 221 |
![]() |
N° | 8 |
![]() |
N° | 32/48 |
![]() |
mm | 220 |
![]() |
z | 12-14 |
![]() |
1 3/8″ | ASAE cat. 6 |
![]() |
HP | 35-70 |
![]() |
cm | 185 |
![]() |
cm | 205 |
![]() |
Kg | 430 |
![]() |
r.p.m. | 221 |
![]() |
N° | 9 |
![]() |
N° | 36/54 |
![]() |
mm | 220 |
![]() |
z | 12-14 |
![]() |
1 3/8″ | ASAE cat. 6 |
![]() |
HP | 40-70 |
![]() |
cm | 205 |
![]() |
cm | 225 |
![]() |
Kg | 455 |
![]() |
r.p.m. | 221 |
![]() |
N° | 10 |
![]() |
N° | 40/60 |
![]() |
mm | 220 |
![]() |
z | 12-14 |
![]() |
1 3/8″ | ASAE cat. 6 |
![]() |
HP | 30-70 |
![]() |
cm | 165 |
![]() |
cm | 185 |
![]() |
Kg | 425 |
![]() |
r.p.m. | 221 |
![]() |
N° | 8 |
![]() |
N° | 32/48 |
![]() |
mm | 220 |
![]() |
z | 12-14 |
![]() |
1 3/8″ | ASAE cat. 6 |
![]() |
HP | 35-70 |
![]() |
cm | 185 |
![]() |
cm | 205 |
![]() |
Kg | 450 |
![]() |
r.p.m. | 221 |
![]() |
N° | 9 |
![]() |
N° | 36/54 |
![]() |
mm | 220 |
![]() |
z | 12-14 |
![]() |
1 3/8″ | ASAE cat. 6 |
![]() |
HP | 40-70 |
![]() |
cm | 205 |
![]() |
cm | 225 |
![]() |
Kg | 475 |
![]() |
r.p.m. | 221 |
![]() |
N° | 10 |
![]() |
N° | 40/60 |
![]() |
mm | 220 |
![]() |
z | 12-14 |
![]() |
1 3/8″ | ASAE cat. 6 |