TILL-RITE T40
20-40 HP (15-30 KW)
540 rpm – cat. 1
The T40 is a side-shift rotary tiller designed to work with tractors ranging from 20 to 40 HP. It is the ideal machine for use anywhere from orchards to nurseries, from vineyards to greenhouses and all other types of landscaping. The high carbon solid steel rotor shaft allows for a working depth up to 18 cm. The rotor shaft also comes with double flanges on the side to facilitate blade replacement. The smooth manual side-shift system requires no lever to operate allowing the tillers to work totally shifted to the right, therefore under plants, sidewalks and flowerbeds, as well as in central position just like any normal centered tiller covering both tractor tire tracks. The T40 also offers the possibility of reversing the chain gears allowing you to increase the speed of the rotor and therefore obtain further ground pulverization on the first pass.
Standard
![Attacco a tre punti reversibile per applicazione frontale o posteriore](https://rotomec.com/site/wp-content/uploads/2021/04/Attacco-spostabile.jpg)
Manual side-shift
![Dual rear roller mounting position, inside or outside the cutting chamber](https://rotomec.com/site/wp-content/uploads/2021/04/rotazione-posteriore-2.jpg)
Front or rear blade rotation
![Manual or hydraulic side-shift up to 40 cm](https://rotomec.com/site/wp-content/uploads/2021/04/T30-riduttore-scontornato-2.jpg)
Gearbox manufactured by Rotomec
![Manual or hydraulic side-shift up to 40 cm](https://rotomec.com/site/wp-content/uploads/2021/04/Tendicinghia-ingrandito-T30-T40-T50-T60-T70_4.jpg)
Lateral ASA 80 chain drive transmission in oil bath
![Choice of fine cut blades, dethatching blades, reverse ‘Y’ blades, paddle blades or hammer type blades](https://rotomec.com/site/wp-content/uploads/2021/04/T40-supporti-albero-rotore.jpg)
Stamped steel rotor shaft supports and transmission
![Choice of fine cut blades, dethatching blades, reverse ‘Y’ blades, paddle blades or hammer type blades](https://rotomec.com/site/wp-content/uploads/2021/04/T40-rotore-con-doppi-mozzi.jpg)
Rotor shaft with flanges for easy blade replacement
Technical features
![]() |
HP | 20-40 |
![]() |
cm | 105 |
![]() |
cm | 120 |
![]() |
cm | 80 |
![]() |
Kg | 165 |
![]() |
r.p.m. | 231/375 |
![]() |
N° | 5 |
![]() |
N° | 20 |
![]() |
mm | 180 |
![]() |
z | 11-14 |
![]() |
1 3/8″ | ASAE cat. 3 |
![]() |
HP | 25-40 |
![]() |
cm | 125 |
![]() |
cm | 140 |
![]() |
cm | 100 |
![]() |
Kg | 185 |
![]() |
r.p.m. | 231/375 |
![]() |
N° | 6 |
![]() |
N° | 24 |
![]() |
mm | 180 |
![]() |
z | 11-14 |
![]() |
1 3/8″ | ASAE cat. 3 |
![]() |
HP | 30-40 |
![]() |
cm | 145 |
![]() |
cm | 160 |
![]() |
cm | 120 |
![]() |
Kg | 205 |
![]() |
r.p.m. | 231/375 |
![]() |
N° | 7 |
![]() |
N° | 28 |
![]() |
mm | 180 |
![]() |
z | 11-14 |
![]() |
1 3/8″ | ASAE cat. 3 |
![]() |
HP | 32-40 |
![]() |
cm | 165 |
![]() |
cm | 180 |
![]() |
cm | 140 |
![]() |
Kg | 235 |
![]() |
r.p.m. | 231/375 |
![]() |
N° | 8 |
![]() |
N° | 32 |
![]() |
mm | 180 |
![]() |
z | 11-14 |
![]() |
1 3/8″ | ASAE cat. 3 |
![]() |
HP | 20-40 |
![]() |
cm | 105 |
![]() |
cm | 120 |
![]() |
cm | 80 |
![]() |
Kg | 170 |
![]() |
r.p.m. | 231/375 |
![]() |
N° | 5 |
![]() |
N° | 20 |
![]() |
mm | 180 |
![]() |
z | 11-14 |
![]() |
1 3/8″ | ASAE cat. 3 |
![]() |
HP | 25-40 |
![]() |
cm | 125 |
![]() |
cm | 140 |
![]() |
cm | 100 |
![]() |
Kg | 190 |
![]() |
r.p.m. | 231/375 |
![]() |
N° | 6 |
![]() |
N° | 24 |
![]() |
mm | 180 |
![]() |
z | 11-14 |
![]() |
1 3/8″ | ASAE cat. 3 |
![]() |
HP | 30-40 |
![]() |
cm | 145 |
![]() |
cm | 160 |
![]() |
cm | 120 |
![]() |
Kg | 210 |
![]() |
r.p.m. | 231/375 |
![]() |
N° | 7 |
![]() |
N° | 28 |
![]() |
mm | 180 |
![]() |
z | 11-14 |
![]() |
1 3/8″ | ASAE cat. 3 |
![]() |
HP | 32-40 |
![]() |
cm | 165 |
![]() |
cm | 180 |
![]() |
cm | 140 |
![]() |
Kg | 240 |
![]() |
r.p.m. | 231/375 |
![]() |
N° | 8 |
![]() |
N° | 32 |
![]() |
mm | 180 |
![]() |
z | 11-14 |
![]() |
1 3/8″ | ASAE cat. 3 |