TILL-RITE T30
16-30 HP (12-22 KW)
540, 2000 rpm – cat. 0 & 1
The T30 is a side-shift rotary tiller designed to work with low power tractors ranging from 16 to 30 HP. It is the ideal machine for use anywhere from orchards to nurseries, from vineyards to greenhouses and all other types of landscaping.
The high carbon solid steel round rotor shaft allows for a deeper working depth (up to 18 cm). The T30 can come with a front or rear blade rotation. The smooth manual side-shift system requires no lever to operate.
These rotary tillers can work totally shifted to the right, therefore under plants, sidewalks and flowerbeds, as well as in central position just like any normal centered tiller covering both tractor tire tracks.
Standard
![Attacco a tre punti reversibile per applicazione frontale o posteriore](https://rotomec.com/site/wp-content/uploads/2021/04/Attacco-spostabile.jpg)
Manual side-shift
![Dual rear roller mounting position, inside or outside the cutting chamber](https://rotomec.com/site/wp-content/uploads/2021/04/rotazione-posteriore-2.jpg)
Front or rear blade rotation
![Manual or hydraulic side-shift up to 40 cm](https://rotomec.com/site/wp-content/uploads/2021/04/T30-riduttore-scontornato-2.jpg)
Gearbox manufactured by Rotomec
![Manual or hydraulic side-shift up to 40 cm](https://rotomec.com/site/wp-content/uploads/2021/04/Tendicinghia-ingrandito-T30-T40-T50-T60-T70_4.jpg)
Lateral ASA 60 chain drive transmission in oil bath
![Choice of fine cut blades, dethatching blades, reverse ‘Y’ blades, paddle blades or hammer type blades](https://rotomec.com/site/wp-content/uploads/2021/04/T30-slitta-ingrandita-scontoranta.jpg)
Side skids for working depth control
Technical features
![]() |
HP | 16-30 |
![]() |
cm | 85 |
![]() |
cm | 100 |
![]() |
cm | 60 |
![]() |
Kg | 135 |
![]() |
r.p.m. | 205 |
![]() |
N° | 4 |
![]() |
N° | 16 |
![]() |
mm | 180 |
![]() |
z | 14-16 |
![]() |
1 3/8″ | ASAE cat. 2 |
![]() |
HP | 20-30 |
![]() |
cm | 105 |
![]() |
cm | 120 |
![]() |
cm | 80 |
![]() |
Kg | 155 |
![]() |
r.p.m. | 205 |
![]() |
N° | 5 |
![]() |
N° | 20 |
![]() |
mm | 180 |
![]() |
z | 14-16 |
![]() |
1 3/8″ | ASAE cat. 2 |
![]() |
HP | 25-30 |
![]() |
cm | 125 |
![]() |
cm | 140 |
![]() |
cm | 100 |
![]() |
Kg | 170 |
![]() |
r.p.m. | 205 |
![]() |
N° | 6 |
![]() |
N° | 24 |
![]() |
mm | 180 |
![]() |
z | 14-16 |
![]() |
1 3/8″ | ASAE cat. 2 |
![]() |
HP | 16-30 |
![]() |
cm | 85 |
![]() |
cm | 100 |
![]() |
cm | 60 |
![]() |
Kg | 140 |
![]() |
r.p.m. | 205 |
![]() |
N° | 4 |
![]() |
N° | 16 |
![]() |
mm | 180 |
![]() |
z | 14-16 |
![]() |
1 3/8″ | ASAE cat. 3 |
![]() |
HP | 20-30 |
![]() |
cm | 105 |
![]() |
cm | 120 |
![]() |
cm | 80 |
![]() |
Kg | 160 |
![]() |
r.p.m. | 205 |
![]() |
N° | 5 |
![]() |
N° | 20 |
![]() |
mm | 180 |
![]() |
z | 14-16 |
![]() |
1 3/8″ | ASAE cat. 3 |
![]() |
HP | 25-30 |
![]() |
cm | 125 |
![]() |
cm | 140 |
![]() |
cm | 100 |
![]() |
Kg | 175 |
![]() |
r.p.m. | 205 |
![]() |
N° | 6 |
![]() |
N° | 24 |
![]() |
mm | 180 |
![]() |
z | 14-16 |
![]() |
1 3/8″ | ASAE cat. 3 |