TURBO-HOP 301
20-60 HP (15-45 KW)
540 rpm – cat. 1 & 2
The Turbo-Hop pendular spreader is an extremely versatile and accurate machine, ideal for spreading not only granular or powdered material but also for spreading material containing a humidity percentage of up to 30 percent. Pendular spreaders can spread up to a width of 14 meters and are designed for 20 to 60 HP tractors. y rotating the spout 90 degrees left or right, the spreader will send material only in that direction, allowing the operator to spread material only on desired spots and minimize waste. The pendular spreader is also particularly suited for spreading corrosive material since components that come in contact with these are made of either stainless steel or polyethylene.
Standard
![Reversible three point hitch for front or rear tractor mounting](https://rotomec.com/site/wp-content/uploads/2021/04/Tramoggia-polyethilene-1.jpg)
Polyethylene hopper to reduce corrosion
![Dual rear roller mounting position, inside or outside the cutting chamber](https://rotomec.com/site/wp-content/uploads/2021/04/Turbo-Hop-riduttore_ingrandito.jpg)
Heavy duty gearbox in oil bath
![Dual rear roller mounting position, inside or outside the cutting chamber](https://rotomec.com/site/wp-content/uploads/2021/04/Turbo-Hop-gruppo-distributore.jpg)
Distributing unit in stainless steel and agitator in stamped steel
![Dual rear roller mounting position, inside or outside the cutting chamber](https://rotomec.com/site/wp-content/uploads/2021/04/Turbo-Hop-scala-graduata-1.jpg)
Graded scale for micrometric flow control adjustment