HURRICANE H40-S

16-40 HP (12-30 KW)
540, 1000, 2000 rpm – cat. 1

The Hurricane H40-S is a sturdy and easy to use flail mower designed to be offset. It is especially designed to offer the best performance wherever professional, highly accurate, safe mowing is required.
The offset can be done either manually, or hydraulically through the use of a hydraulic cylinder. The maximum offset for all sizes is 40 cm to the right.
The H40-S model also features an oversize real roller that was designed to be assembled in two positions, either away from the rotor or closer to it, allowing in this case the rotating blades to keep the roller clean.
The rotor is electronically balanced and is equipped with sealed rotor bearings.
The machine comes with a double pivot blade attachment to eliminate blade breakage, excessive wear and rotor damage.
The blades turn in a clockwise direction, going against the direction of travel. This cutting motion from bottom to top allows for a much cleaner finish. The cutting height is controlled by the rear roller equipped with a roller scarper.

Standards

Reversible three point hitch for front or rear tractor mounting

Reversible three point hitch for front or rear tractor mounting

Dual rear roller mounting position, inside or outside the cutting chamber

Dual rear roller mounting position, inside or outside the cutting chamber

Manual or hydraulic side-shift up to 40 cm

Manual or hydraulic side-shift up to 40 cm

Manual or hydraulic side-shift up to 40 cm

Manual belt tensioning

Choice of fine cut blades, dethatching blades, reverse ‘Y’ blades, paddle blades or hammer type blades

Choice of fine cut blades, dethatching blades, reverse ‘Y’ blades, paddle blades or hammer type blades

Technical features

HP 16-40
cm 120
cm 136
cm 89
Kg 250
r.p.m. 2.278
m/s 45
48
mm 20/60
2 SBPX
1 3/8″ ASAE cat. 3

 

HP 20-40
cm 150
cm 163
cm 116
Kg 283
r.p.m. 2.278
m/s 45
64
mm 20/60
2 SBPX
1 3/8″ ASAE cat. 3

 

HP 25-40
cm 180
cm 194
cm 147
Kg 316
r.p.m. 2.278
m/s 45
76
mm 20/60
2 SBPX
1 3/8″ ASAE cat. 3

 

Optional equipment

0099206

Side skids

0099687

1000 rpm clockwise transmission, additional

0099688

1000 rpm anticlockwise transmission, additional

0099689

2000 rpm clockwise transmission, additional

0099690

2000 rpm anticlockwise transmission, additional

0099211

Three point hitch cat. ‘1N’, additional

0099529

P.T.O. shaft tractor end yoke Z6x21x25, additional

0099560

Driveline with overrunning clutch, additional

0099212 H40-S48

0099213 H40-S60

0099214 H40-S72

Rotor with dethatching blades

0099218 H40-S48

0099219 H40-S60

0099220 H40-S72

Rotor with reverse “Y” blades

0099224 H40-S48

0099225 H40-S60

0099226 H40-S72

Rotor with triangular paddle blades

0099200 H40-S48

0099201 H40-S60

0099202 H40-S72

Rotor with hammers, additional

0099207

Hydraulic cylinder for side shift

0099208 H40-S48

0099209 H40-S60

0099210 H40-S72

Front steel deflectors

Manuals

Other models

HURRICANE H70

30-70 HP (22-52 KW)
540 rpm
cat. 1 & 2

DESTROYER D90

40-90 HP (30-67 KW)
540 rpm
cat. 1 & 2